You have 0 Item(s) in your cart. Total : £0.00

  • Mon - Sat 9.00 - 19.00 Sunday Closed
  • + (954) 275 3161 support@fulcrum100.com
  • Follow Us

Services

HomeServices
Over 25 Years of Expertise in Plumbing

We are small group of plumbers and construction workers. We can help you with plumbing problems and any other service related to plumbing.

Plumbing is any system that conveys fluids for a wide range of applications. Heating and cooling, waste removal, and potable water delivery are among the most common uses for plumbing however plumbing’s not limited to these applications. Plumbing utilizes pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Trades that work with plumbing such as boilermakers, plumbers, and pipefitters are referred to the plumbing trade.

Services that we offers

  • Replace Rotted Insulation
  • Cleaning Air Conditioners in the Spring
  • Covering Your Air Conditioner Condenser Unit
  • Fix a Sinking Air Conditioner Pad
  • Putside Plumbing
  • Broken Fixtures
  • Drain clogs

Rotting insulation in your out of doors A/C traces can price you vitality. The repair is straightforward. We sh

ow you methods to do it and inform you the place to get the particular insulating foam.

Condensation that types in your out of doors A/C traces reduces effectivity and raises your vitality prices. So you want to set up new insulation. Begin by peeling off all of the previous foam insulation.. Then measure the surface diameter on the bigger of the 2 tubes (the thin tube doesn’t want insulation). Sadly, you gained’t discover the fitting insulation at any dwelling heart. As an alternative, contact a refrigeration provide home or on-line provider for brand spanking new foam and insulating tape (Insul-Lock tubing insulating foam, and Nomaco Poly Tape.

Minimize the brand new insulation to size.

Measure the size of the A/C line and minimize the insulation just a few inches longer. Go away the adhesive liner in place and set up the insulation.

Required Instruments for this Venture

Have the mandatory instruments for this DIY challenge lined up earlier than you begin—you’ll save time and frustration.

  • Tape measure
  • Utility knife

Required Supplies for this Venture

Keep away from last-minute buying journeys by having all of your supplies prepared forward of time. This is a listing.

  • Cork tape
  • Foam insulation
2

Save

Few routine chores will repay extra handsomely, each in consolation and in saved, than a easy air-conditioner cleansing. The payoff: Summertime consolation and decrease cooling payments. You may additionally delay the lifetime of your air conditioner.

A very powerful step: Clear the out of doors unit

On this article, we’ll present you the right way to clear and keep your central air conditioner to maintain it working effectively. We can’t reveal the upkeep steps for a window-mounted mannequin right here. Most central air conditioners have two fundamental elements: an out of doors unit (compressor/condenser) that sits subsequent to your own home and an indoor unit (evaporator) that is situated in a central duct close to your furnace (Fig. A). When you have a warmth pump as an alternative of a furnace, the indoor unit will likely be within the air handler. Use the identical upkeep steps we present right here. In case your furnace seems completely different from the one in Fig. A, or you may have a warmth pump, use the proprietor’s handbook to seek out your means round it. The essential elements would be the similar.A very powerful upkeep steps are pretty easy, but when that is the primary time you’ve got cleaned the unit, permit a few half day to fastidiously work by means of the steps. For those who’re lower than the duty, name a professional (look underneath “Air Conditioning Contractors” in your Yellow Pages). Cleansing and servicing a central air conditioner prices $100 to $250.Fig. A reveals a typical central air con/furnace setup. About Two tubes of copper  join the out of doors the compressor and the condenser coil (a “coil” is a mixture of the fins and the tubes) to the indoor coil’s evaporator  that is situated within the plenum (Fig. A) above the furnace blower. One tube is roofed with foam insulation. When you have a warmth pump, each tubes will likely be insulated.Exterior, your essential job is to wash the condenser coil (Images 2 – Four). The fan contained in the condenser coil sucks air by means of the fins, and consequently, pulls dust and particles with it. Mud, leaves, useless grass and the rest that collects on the fins will block airflow and cut back the unit’s effectivity. Grass clippings thrown by the garden mower and “cotton” from cottonwood bushes and dandelions are notably unhealthy offenders. You might need to clear the fins weekly and even day by day through the spring “cotton” season! At all times start by shutting off energy (Picture 1).Then proceed with the cleansing (Images 2 – Four). If the fan motor (Picture three) has lubrication ports, apply 5 drops of particular oil for electrical motors (not penetrating or all-purpose oil). You will discover oil for electrical motors at shops. Many fan motors are maintenance-free—they do not have oil ports (ours does not) and cannot be lubricated. Verify your proprietor’s handbook if not sure.The compressor and the motor sit contained in the coil (Fig. A). They’re often sealed and will not want upkeep. Nevertheless, you probably have an older compressor that is belt-driven by a separate motor, lubricate the motor by means of its oil ports. In each case, preserve an eye fixed out for darkish drip marks on the underside of the compressor case or pad (Picture 5). This means an oil leak; the compressor or tubes may be leaking coolant (refrigerant) as nicely. For those who discover a leak, name in a professional to test the issue. Do not tighten joints to attempt to cease leaks your self! Over-tightening could make the issue worse. And solely a professional with correct tools can recharge the system to the correct degree of coolant.

Determine A: Central Air Conditioning System

Refrigerant within the copper tubes absorbs warmth on the coil evaporator inside, and cools the indoor air after which releases warmth on the condenser coil outdoor.

A printable model of this illustration is on the market within the Extra Data on the finish of this story.

Essential outdoors startup pointers

Compressors are surprisingly fragile. Comply with these precautions when restoring the ability:If the 240-volt energy to your compressor (Picture 1) has been off for greater than 4 hours, do not begin the out of doors unit instantly after cleansing. As a substitute:1. Transfer the change from “Cool” to “Off” at your inside thermostat.2. Change the 240-volt energy again on and let the out of doors unit sit for 24 hours. (This permits a warming factor to warmth the compressor’s inner lubricant.)three. Change the thermostat to its cooling mode and set the temperature in order that the out of doors unit comes on. Then test the out of doors unit like we present in Picture 5.For those who change off the air conditioner (on the thermostat) at any time, wait no less than 5 minutes earlier than switching it again on. As soon as off, the compressor wants time to “decompress.” For those who restart it too quickly, you will stress the motor. Many thermostats have computerized time delays constructed into the circuitry to guard the compressor from this downside.Clear the out of doors unit when the temperature is 60 levels F or greater. Compressors will not work correctly in temperatures under 60 levels.

Clear the indoor unit

You often haven’t got easy accessibility to the evaporator coil that is contained in the plenum or a essential duct close to the furnace (Fig. A). If you will get to it, vacuum the underside aspect of its fins with a mushy brush attachment.In any other case, have a professional clear it each few years. The perfect prevention is to maintain the air that flows by means of it clear. Start by turning off the furnace.There’s often a change mounted on, or near it. (On warmth pumps, the change may be a circuit breaker.) Or shut off the ability to the furnace on the essential panel electrical. Then substitute the filter in the furnace  if it is soiled (Picture 6) and vacuum up any mud within the blower cupboard (Picture 7).The compartments blower of newer furnaces are so tight (Picture 7) that you just often cannot lubricate the blower. Have a professional do it throughout periodic furnace upkeep.The evaporator coil within the plenum dehumidifies your indoor air because it cools it through the summer season. The water that is condensed on the coil flows out by means of a condensation tube.Verify it to ensure the tube is not clogged by the sludge and algae, particularly on the drain port (Picture eight). A versatile tube is straightforward to tug off and clear, however you might need to noticed off a inflexible plastic tube with a hacksaw to test it. Then reweld it with the correct pipe joint solvent and coupling.

Required Instruments for this Venture

Have the mandatory instruments for this DIY challenge lined up earlier than you begin—you’ll save time and frustration.

Air conditioning, Air conditioning coral springs, Air conditioning Miami, Air conditioning Boca Raton, Air conditioning repair, Air conditioning price, Air conditioning unit, Air conditioning system, Air conditioning

 

  • Four-in-1 screwdriver
  • Security glasses
  • Store vacuum

Backyard hose and sprayer nozzle
Funnel
Wisk broom

You need to cover your ac unit, air conditioning condenser with the best plywood for the winter. Don’t wrap it with the plastic, it will certainly rust.

Many householders are tempted to wrap their air conditioner condensers (the skin unit) to guard them over the winter. However wrapping an A/C condenser is rarely a good suggestion. Metal rusts, and moist metal rusts much more. Even when wrapped tightly, your condenser is not hermetic. So moisture will get trapped underneath your tarp and condenses on the within of the unit. The moisture in your neighbor’s condenser is free to evaporate.Masking an A/C condenser additionally encourages rodents to maneuver the household into new digs the place they’re protected against the weather. As soon as they’re settled in, they’re going to gnaw on the compressor wiring and insulation. Come spring, you will have a pungent cleanup, a rusty A/C condenser and a hefty invoice for rewiring.If you wish to shield the unit from falling icicles, simply place a bit of plywood over the fan guard and weight it down with bricks. If you wish to shield the steel and maintain it trying good, give your condenser a coat of automotive wax earlier than the snow flies.

Required Supplies for this Venture

Keep away from last-minute purchasing journeys by having all of your supplies prepared forward of time. Here is an inventory.

  • Plywood
  • Bricks

Save

Air conditioner compressors and warmth exchanger pumps sitting on concrete pads might settle and tip over time, placing pressure on coolant strains. One in all these fixes can appropriate the issue.

Leveling a concrete pad

The concrete pads below air conditioner and warmth exchanger models are inclined to settle over time. So long as there is no pressure on the copper coolant tubes and electrical strains, and the unit stays dry and degree, it is OK that the pad has sunk. But when it will continues to sink and it will pulls the strains tight, or if water puddles across the unit, you may have to take motion.Attempt working an extended board below one finish of the pad, lifting it up, then you need to start packing sand below it. Do the identical on the opposite finish, making the pad as degree as potential. Carry the pad slowly to keep away from cracking it. You will not have to unhook or take away the air conditioner. Nevertheless, if the pad breaks aside, have an good AC technician to disconnect the unit. Then, break up and take away the pad, and set up a brand new leveled-in one. Think about changing it with a plastic pad. They’re obtainable the place air conditioners are bought and on-line.

Required Supplies for this Mission

Keep away from last-minute procuring journeys by having all of your supplies prepared forward of time. This is a listing.

  • Sand
  • 2 x eight x 10 or different lengthy board

Air conditioning, Air conditioning coral springs, Air conditioning miami, Air conditioning boca raton, Air conditioning repair, ac repair, ac unit, Air conditioning system. Air conditioner, Air conditioner coral springs, Air conditioner miami, Air conditioner boca raton, Air conditioner repair, Air conditioner system.

Save

At PlumberX, we саn hеlр уоu fix unexpected dаmаgеѕ аnd unѕсhеdulеd brеаkdоwnѕ. We hаvе bееn helping families from dеѕіgn рhаѕе tо rеmоdеlіng оf residents, basement finishes, decks аnd rооm additions. Kіtсhеn and bаth remodel. Wе аrе соmmіttеd tо customer satisfaction wіth quality аrtіѕtrу.
1
  • Flеxіbіlіtу
  • Cоmреtеnсе
  • Rеѕultѕ
  • Vаluе fоr mоnеу
  • High ѕрееd
2
At PlumberX, we саn hеlр уоu fix unexpected dаmаgеѕ аnd unѕсhеdulеd brеаkdоwnѕ. We hаvе bееn helping families from dеѕіgn рhаѕе tо rеmоdеlіng оf residents, basement finishes, decks аnd rооm additions. Kіtсhеn and bаth remodel. Wе аrе соmmіttеd tо customer satisfaction wіth quality аrtіѕtrу.
1
  • Flеxіbіlіtу
  • Cоmреtеnсе
  • Rеѕultѕ
  • Vаluе fоr mоnеу
  • High ѕрееd
2
At PlumberX, we саn hеlр уоu fix unexpected dаmаgеѕ аnd unѕсhеdulеd brеаkdоwnѕ. We hаvе bееn helping families from dеѕіgn рhаѕе tо rеmоdеlіng оf residents, basement finishes, decks аnd rооm additions. Kіtсhеn and bаth remodel. Wе аrе соmmіttеd tо customer satisfaction wіth quality аrtіѕtrу.
1
  • Flеxіbіlіtу
  • Cоmреtеnсе
  • Rеѕultѕ
  • Vаluе fоr mоnеу
  • High ѕрееd
2

Why Choose Us

24/7 availality

Dedicated team

G uranteed satisfaction

Free Estimate

Emergency Leaks & Pipe Bursts

If you have an emergency plumbing need, simply call our 24 hour emergecny plumbing

01723873549 OR Contact Us

Created by: FukcrumwebDesign.net

This website is available! - Get more air conditioning leads Now!